This version is limited to 5 minutes only, please purchase the Headunit Reloaded Emulator for the full version!
How to use the app?
USB Mode
Plug in the USB to your device (in case of tablet use an OTG cable), when prompted make sure you allow HUR to be the default app for the action and you check the always box.
If you are running the app on a device with Android 7.0 or higher, you might need to pull down the notification bar and select the connected USB device before the app starts (this is device dependent)
If the app does not start automatically when you plug in your phone, you can always open HUR, tap the USB button and select the phone from the list.
Wifi Mode
Open Android Auto on the phone, go to About and tap the "About Android Auto" header 10 times to become a developer
Once you are a developer from the 3 dotted right corner select Start Headunit Server
Close Android Auto
Start tethering (from the phone)
Connect your unit device running HUR to the newly created hotspot
Start HUR
Select Wifi
Wifi Direct Mode
Open HUR, press Wifi Direct and follow on-screen instructions
Self Mode (when Android Auto and HUR are running on the same device)
Open Android Auto on the phone, go to About and tap the "About Android Auto" header 10 times to become a developer
Once you are a developer from the 3 dotted right corner select Start Headunit Server
Close Android Auto
Start HUR
Select SelfMode
FAQ / Troubleshoot
All I get is a black screen
- If you are using an Android powered headunit (Joying, Xtrons, etc) look for a setting on your device which allows Video Playback during drive
- Try changing HUR settings and enable Software decoding
HUR crashes after start
- Try changing HUR setting and disable "Media Workaround"
Compatible with: Joying, Eonon, Grom Vline, Xtrons, PX5 and PX3 units, A-Sure, RK3188 units, RK3066 units, Avin and other Android powered head units.
More FAQ, including hardware key support, intent support and others as well troubleshooting can be found: https://forum.xda-developers.com/general/paid-software/android-4-1-headunit-reloaded-android-t3432348
If you have any difficulties using the app, or you any support with it, you are always welcome to contact me.
Cette version est limitée à 5 minutes seulement, veuillez acheter l'émulateur Headunit Reloaded pour la version complète!
Comment utiliser l'application?
Mode USB
Connectez l’USB à votre appareil (dans le cas d’une tablette, utilisez un câble OTG). Lorsque vous y êtes invité, assurez-vous de laisser HUR être l’application par défaut de l’action et cochez la case Toujours.
Si vous exécutez l'application sur un appareil doté d'Android 7.0 ou d'une version ultérieure, vous devrez peut-être supprimer la barre de notification et sélectionner le périphérique USB connecté avant le démarrage de l'application (cela dépend de l'appareil).
Si l'application ne démarre pas automatiquement lorsque vous branchez votre téléphone, vous pouvez toujours ouvrir HUR, appuyez sur le bouton USB et sélectionnez le téléphone dans la liste.
Mode Wifi
Ouvrez Android Auto sur le téléphone, accédez à À propos de et appuyez 10 fois sur l’en-tête "À propos d’Android Auto" pour devenir un développeur
Une fois que vous êtes un développeur à partir du coin droit 3 pointillé, sélectionnez Démarrer le serveur unitaire
Fermer Android Auto
Démarrer le partage de connexion (depuis le téléphone)
Connectez votre appareil exécutant HUR au point d'accès nouvellement créé
Démarrer HUR
Sélectionnez Wifi
Mode Direct Wifi
Ouvrez HUR, appuyez sur Wifi Direct et suivez les instructions à l'écran
Self Mode (lorsque Android Auto et HUR s'exécutent sur le même appareil)
Ouvrez Android Auto sur le téléphone, accédez à À propos de et appuyez 10 fois sur l’en-tête "À propos d’Android Auto" pour devenir un développeur
Une fois que vous êtes un développeur à partir du coin droit 3 pointillé, sélectionnez Démarrer le serveur unitaire
Fermer Android Auto
Démarrer HUR
Sélectionnez SelfMode
FAQ / Dépannage
Tout ce que je reçois est un écran noir
- Si vous utilisez une unité centrale Android (Joying, Xtrons, etc.), recherchez un paramètre sur votre appareil permettant la lecture vidéo pendant la conduite.
- Essayez de modifier les paramètres HUR et activez le décodage logiciel
HUR se bloque après le démarrage
- Essayez de modifier le paramètre HUR et désactivez "Solution de contournement"
Compatible avec: Joying, Eonon, Grom Vline, Xtrons, unités PX5 et PX3, unités A-Sure, RK3188, unités RK3066, Avin et autres unités principales Android.
Vous trouverez plus de FAQ, y compris le support des clés matérielles, le support technique et autres, ainsi que le dépannage: https://forum.xda-developers.com/general/paid-software/android-4-1-headunit-reloaded-android-t3432348
Si vous rencontrez des difficultés lors de l’utilisation de l’application ou si vous avez un support quelconque, vous pouvez toujours me contacter.